Here are two wine bottle gift bag templates. Both require the use of a 12×24 mat to cut a bag that will hold a typical wine bottle. I did not put the dashed lines in the svg files. Score and fold where the dashed lines are shown below. I would reinforce the top of either bag if it will have a handle and be used for anything heavy. The first file is for a square bottomed bag. Set the height at 8″ and cut two of this pattern for one bag that is 13″ tall with a 3.5×3.5″ base.
The second pattern is a circular bottom bag. It has a separate bottom piece. I would cut two circles if the bag is to be used for anything heavy, one for the outside and one for the inside, with the tabs from the sides sandwiched in between. Set the height at 11.5 inches for this pattern to make a bag that is 13″ tall with a 3.25″ diameter base. Cut one or two circles at 3.25″ tall for the bottom of the bag.
These files are for personal use only. Feel free to link to this post, but the files are not to be shared or distributed in any way.
Download the files from here.
http://www.mediafire.com/file/tmmydwyf2wm/wine gift bags.zip