Here is a print and cut baseball cupcake wrapper that I made. The svg file has the image embedded, so if you are using eCAL or SCAL3 simply import the file and you are good to go. I did make a slight bleed on the image file so if you are using a program other than eCAL or SCAL3 you will center the image file with the cut file. As always, I recommend cutting test samples since your cupcakes will probably be a different size than mine.
The download is a zip file with a single layer svg file for use with eCAL and SCAL3 and a PNG image file.
My files are for personal use only. Feel free to link to this post, but the files are not to be shared or distributed in any way.
Download the files here.