WOYWW and my pumpkin box updated

September 26, 2012

Here’s what my table looks like today for What’s on Your Workdesk? Wednesday.  Not much of a change is it?  I skipped my usual challenge this week since it was a specific kind of card and I’m NOT a  card maker (OK, I’m something of a baby too!)    What you can’t see is the Cub Scout uniform shirt on my chair that I need to sew patches onto.  Aleene’s Tack-It Over and Over is good for more than just making your cutting mats sticky again, it will hold patches for a while too. 

Since Halloween is just around the corner I thought that I would update my pumpkin treat bag for use with eCAL and SCAL3.  I mostly just made little tweaks and I added a shape to use as an inside panel behind the face.  This time I made it smaller and put glittered transparency inside so that we can use it with an LED tealight.

The download is a layered svg for use with SCAL2, SCAL3, and eCAL. This file is for personal use only. Feel free to link to this post, but the file is not to be shared or distributed in any way.

Download the layered file from here.  The single layer files were not changed and are still available here.


Pillow box svg file

April 23, 2012

Here is a  small pillow box that I made to hold jelly beans for the kids.  The flaps with the notches should be folded in before the solid flaps. :)   I did not include a file without scoring lines because of the curved score lines.

The downloadis a layered svg for use with SCAL2, SCAL3, and eCAL. This file is for personal use only. Feel free to link to this post, but the file is not to be shared or distributed in any way.

Download the file from here.


Seashell or scalloped box revisited

May 20, 2011

Here is my seashell box in SVG, PDF, and AI formats.  🙂  The PDF is a vector PDF so it can be imported into a cutting program or can be used for printing and hand cutting.   The files will make a box that is approximately 3″H x 3.5″W x 1.5″D when the file is imported at 4″ tall for the SVG and AI files and 9.1 inches for the PDF.

The download includes a layered svg file for use with SCAL2 and a single layer svg file, layered AI file, and a PDF. These files are for personal use only.

My files are for personal use only.  Feel free to link to this post, but the files are not to be shared or distributed in any way.

Download the files from here.


Candy wrapper box svg file repost

December 16, 2010

I am reposting this box since I think that I made the original files with Inkscape 0.48 and I have learned since then that there are compatibility issues with SCAL1 and MTC.  I have fixed and successfully imported the layered file with lines for scoring in the current version of MTC and the single layer file (without score lines) in SCAL1.   The files make a box that is 2×1.25×1.25 inches (not counting the ends) when the file is set to 4.5 inches tall.

I closed the box two different ways.  The first box I closed by pushing in on each scored triangle and tying ribbon around the box ends.  The second box I only pushed in on two of the triangles and used brads to hold the ends closed.  Other options include using a strong adhesive or decorative clips or staples.

The download includes a layered svg for use with SCAL2 and a single layer svg. These files are for personal use only. Feel free to link to this post, but the files are not to be shared or distributed in any way.

Download the files from here.


Circle flap envelope

October 18, 2010

Here is a circle flap envelope svg by request from the SCAL forum.  This envelope is in 6 parts so that it can be used for large square cards or cut with the baby bug.  Score, fold, and attach the half circles to the larger square, then cover the attachments with the smaller square.

The download is a zipped folder with svg files for use in either version of SCAL. These files are for personal use only. Feel free to link to this post, but the files are not to be shared or distributed in any way.

Download the files from here.


Candy wrapper box

October 1, 2010

Here is a candy wrapper box svg by request.  One file has a layer for scoring and the other is a single layer file.  The files make a box that is 2×1.25×1.25 inches (not counting the ends) when the file is set to 4.5 inches tall.

I closed the box two different ways.  The first box I closed by pushing in on each scored triangle and tying ribbon around the box ends.  The second box I only pushed in on two of the triangles and used brads to hold the ends closed.  Other options include using a strong adhesive or decorative staples.

The download includes a layered svg for use with SCAL2 and a single layer svg. These files are for personal use only. Feel free to link to this post, but the files are not to be shared or distributed in any way.

Download the files from here.

If you are using SCAL1 or MTC the corrected files can be downloaded here.


3D soccer ball svg files

September 14, 2010

Here is a 3D soccer ball by request.  🙂  You need to cut the black file twice for 12 pentagons and the white file four times for 20 hexagons total.  Assemble the pieces using a strong adhesive.  Start with a black piece (or whatever color you choose) and surround it with white pieces.  Build the ball up from there, making sure that the black pieces only touch white pieces.  The files will make a ball that is about 4.25 inches when the file height is set to 3.86 inches.

If you are using SCAL1, the files were made so that they will be correctly proportioned if you set the height the same for both files.

The download includes two layered svg files for use with SCAL2 and two single layer svg files. These files are for personal use only. Feel free to link to this post, but the files are not to be shared or distributed in any way.

Download the files from here or from MediaFire here.