Baseball print and cut cupcake wrapper

April 27, 2013

Here is a print and cut baseball cupcake wrapper that I made.  The svg file has the image embedded, so if you are using eCAL or SCAL3 simply import the file and you are good to go.  I did make a slight bleed on the image file so if you are using a program other than eCAL or SCAL3 you will center the image file with the cut file.  As always, I recommend cutting test samples since your cupcakes will probably be a different size than mine.  

IHM baseball pnc wrapper

The download is a zip file with a single layer svg file for use with eCAL and SCAL3 and a PNG image file.

My files are for personal use only.  Feel free to link to this post, but the files are not to be shared or distributed in any way.

Download the files here.


Baseball cupcake wrapper

April 19, 2013

Here is a baseball cupcake wrapper for Judy.  Set the height at 2.6 inches for an average cupcake.  As always, I recommend cutting test samples since your cupcakes will probably be a different size than mine.  

ihm baseball cupcake wrapper

The download is a zip file with a single layer svg file for use with any version of SCAL and a DXF file.

My files are for personal use only.  Feel free to link to this post, but the files are not to be shared or distributed in any way.

Download the files here.


Easter egg cupcake wrapper

April 20, 2011

Here is an svg for an Easter egg cupcake wrapper.  Set the height at 2.6 inches for an average cupcake.  As always, I recommend cutting test samples since your cupcakes will probably be a different size than mine.  🙂

This svg file can be used in either version of SCAL. This file is for personal use only. Feel free to link to this post, but the file is not to be shared or distributed in any way.

Download the file from here.


Grassy cupcake wrapper

April 5, 2011

Here is an svg for a grassy cupcake wrapper.  Set the height at 3.2 inches for an average cupcake.  As always, I recommend cutting test samples since your cupcakes will probably be a different size than mine.  🙂

This svg file can be used in either version of SCAL. This file is for personal use only. Feel free to link to this post, but the file is not to be shared or distributed in any way.

Download the file from here.

 


Rose petal heart printable cupcake wrapper

February 12, 2011

Here is a printable cupcake wrapper with rose petal hearts for Valentines day.  The width should be 8.6 inches for cupcakes that are the same size as mine.  🙂

The svg version for cutting with electronic die cutters is available here.

The download is a png file for printing and hand cutting (300 dpi).  This file is for personal use only.  Feel free to link to this post, but the file is not to be shared or distributed in any way.

Download the 300 dpi file from here.


Candy heart printable cupcake wrapper

February 11, 2011

Here is a printable cupcake wrapper with candy hearts for Valentines day.  The width should be 8.6 inches for cupcakes that are the same size as mine.  🙂

The svg version for cutting with electronic die cutters is available here.

The download is a png file for printing and hand cutting (300 dpi).  This file is for personal use only.  Feel free to link to this post, but the file is not to be shared or distributed in any way.

Download the 300 dpi file from here.


Happy Halloween cupcake wrapper svg

October 21, 2010

Here is a Happy Halloween cupcake wrapper that coordinates with my title/border here.  Set the height at 3.4 inches for an average cupcake.  As always, I recommend cutting test samples since your cupcakes will probably be a different size than mine.  🙂

This svg file can be used in either version of SCAL. This file is for personal use only. Feel free to link to this post, but the file is not to be shared or distributed in any way.

Download the file from here.